|
|
Walls and Forms Inc. - 3/17/2008
Fin Perf Cap System Makes it Easy to Use Your Hub System to its Fullest
Potential
Walls + Forms Inc. now offers a fin kerf cap system that makes it simple to create usable wall space and
merchandising displays using your hub system. It is ideally suited for adding slatwall, FoamCore, and other panel
types for merchandising and exhibit applications.
Using a panel product such as the Walls + Forms PVC-3700 Series Slatwall, the edges are supplied capped with
a specially designed extrusion for hub systems that creates a support frame. The user simply assembles the hubs
and bottom railing and then slides the supported frame into the hubs and bottom railing. The panel is now captured
on all sides. Finally, the user secures the top railing to finish off the panel. Again, the panel is supported on all four
sides.
The fin kerf cap from Walls + Forms provides rigidity and is manufactured with an extended double edge or ‘Fin’
running the length of the profile. It can be attached to ¾” wood and plastic panels using a 1/8” saw kerf cut on
front and back of the panel edges.
For further information, visit http://wallsforms.com/Components/fin-kerf-cap.html or contact
sales department, Walls + Forms Inc., P.O. Box 741112, Dallas, TX 75374-1112 USA.
Phone: 972-745-0800. Fax: 972-304-8402. E-Mail: info@wallsforms.com
Url: www.wallsforms.com & www.displaysource.com
www.wallsforms.com
|
|
|
